USING MOBILE BULB IS [ON/OFF].

 

Introduction

In today's era of smart homes, automating appliances has become easier and more accessible. This project demonstrates how to create a simple yet effective smart bulb control system using an Arduino, , HC-05 Bluetooth module, a relay, and a custom smartphone app. The goal is to allow users to control a bulb remotely through Bluetooth communication

Components Required

  • Arduino UNO
  • Breadboard
  • HC-05 Bluetooth Module
  • 5V Relay Module
  • Bulb with Holder
  • Smartphone with Custom App
  • Connecting Wires
  • Power Supply

How It Works

  1. Bluetooth Communication:
    The smartphone app sends an ON or OFF command via Bluetooth to the HC-05 module. The HC-05 transmits this data to the Arduino.

  2. Signal Processing by Arduino:
    The Arduino reads the received signal and processes it. If the signal is "ON," the relay is triggered to turn the bulb on. If the signal is "OFF," the relay disconnects the circuit, turning the bulb off.

  3. Relay Control:
    The relay acts as a switch, controlling the high-voltage connection to the bulb. This ensures safety and efficient control of the appliance.



Circuit Diagram

  • Connect the HC-05 module to the Arduino:

    • VCC to 5V
    • GND to GND
    • TX to Arduino RX (pin 10)
    • RX to Arduino TX (pin 11)

  • Connect the relay:

    • IN to Arduino Digital Pin (e.g., Pin 8)
    • VCC to 5V
    • GND to GND

  • The bulb is connected to the relay's NO (Normally Open) and COM pins.

  • then the final result becomes..

1]




2]


3] code for the mobile app from MIT app inventor.

Smartphone App

The custom-built smartphone app sends ‘o’ to turn the bulb ON and ‘a’ to turn it OFF. The app is designed to establish a Bluetooth connection with the HC-05 module, ensuring seamless communication.



Conclusion

This project provides a practical and cost-effective solution to home automation. By leveraging Arduino, Bluetooth, and a smartphone, you can easily control home appliances with a simple tap on your phone. This project can be further enhanced by integrating voice commands or Wi-Fi control for advanced functionality.

 


Comments

Post a Comment

Popular posts from this blog

What is transistor

Image
Project : Transistor  What is a Transistor?           Def: -  A transistor is a semiconductor device used to amplify or                       switch electronic signals and electrical power.                   Types of transistor:            NPN: npn is the type of transistor with layers arranged as Negative-Positive-                        Negative           Reference Link to more  about NPN visit here :                                         // What is the npn transistor //   PNP: pnp is the type of transistor with layers arranged as Positive-          Negative-Positive  used for amlification or switchi...
Read more

Nutrients in Food

Image
   Title:  Nutrients in Food. THIS PROJECT MADE WITH ELECTRONIC COMPONENT .  DESCRIBE THE VITAMINS, LIPIDS, PROTEINS AND MINERALS . COMPONENT ARE USED IN THIS PROJECT ARE FOLLOWING Breadboard LEDs Jumper wire HC 05 Blutoth module Power Source Mobile Arduino     The figure of the above components   BREADBOARD                                                                                                                                                                                 ...
Read more